Description
Motorcycle 12 V Lighter Power Outlet Cigarette Socket Handlebar Mount Plug Boot #ct/gmnt/sbt/cplg/pba
CIGARETTE LIGHTER SOCKET KIT COMES WITH A MOUNT THAT FITS HARLEY DAVIDSON AND OTHER LARGER DIAMETER HANDLEBARS AND FRAME MEMBERS 7/8″ to 1-1/4″. ALSO INCLUDES LIGHTER SOCKET AND VINYL WEATHER PROOF CONNECTOR BOOT, LIGHTER PLUG AND OPENING BOOT, AND TWO FEMALE TERMINAL CONNECTORS. ALL COMPONENTS ARE MADE OUT OF UV NYLON OR NICKEL PLATED STEEL.. #ct/gmnt/sbt/cplg/pba
Great for Power point USB, GPS, iPODs, Cell Phones and all 12 volt accessories.
Assembled in the USA form domestic and imported components by 12vtechnology.
This is a kit of one female lighter socket with cap, connector vinyl boot, lighter plug and weather proof boot, a special socket mount as shown and two female crimp wire connectors.
The socket can be used for both lighting cigarette or for accessories such as GPS, 12 volt chargers or iPods. Works with all lighter plugs and all 12 volt style accessory plugs. Comes with the lighter socket plug/ boot combination shown.
The socket is made of a heavy nylon UV resistant body and a nickel plated core. A vinyl opening cap inserts into the core and snaps over the socket rim to produce a waterproof seal. The socket works with all pop out style lighter plugs or with standard accessory plugs. Internal prongs hold the plug for better vibration resistance. The terminals are male 0.250 or 6mm style crimp terminals. This assembly comes with a vinyl terminal boot to keep the contact dry. The boot has a hole in the back for your wires. It is rated for 15 amps at 12 volts. Socket length from flange to the end of the terminals is 2.0″. Patent Pending by 12vtechnology.
Works with any standard cigarette lighter plug or accessory plug
The lighter plugs shown is a pop out kind, nickel plated. Operates on 12 volts at 5 amps when plugged into the socket. will get hot in about 30 seconds. Comes with a vinyl plug boot to make the plug socket combination more waterproof. When using a 12 volt plug and socket combination outdoors, there is a gap between the socket and the plug that is susceptible to water entry. The plug boot slides over the cigarette lighter plug . When the plug is inserted into the power outlet / socket, the boot presses up against the socket surface and forms a seal. No more blown fuses or intermittent operation.
The mount clamps on to the handlebars and clamp the the socket securely the mount. A series of rubber bushings allow the mount to adapt to handlebars from 7/8″ to 1-1/4″ in diameter. The UV vinyl contact boot slips into the mount and over the socket contacts to protect them from weather.
Kit assembly instructions included.
