Description
Red Waterproof Panel Mount 12 Volt USB Charger 3.1 Amp + Voltmeter + wires + Fuse
SHIPS From the USA
Now with Interconnect jumper cable.
Comes with mounting washers.
This is a listing for one combination red voltmeter and red dual USB charger with Jumper cable and waterproof fuse holder with fuse ( blue available upon request). Operates off of 12 volts. The material are of high quality and can be used for outside operation, waterproof front. #ycn/cvmr/cur/tplt/4/fs15
Charger:
Red power on LED
Over-current over-voltage,
over-load and over-temperature protection.
The intelligent control will prolong the cycle life of the battery.
High working efficiency: over 85%. Rapid charging your phone safely and without overcharging your battery.
1: Input : 12 volt
2: Output : 5V—3.1A
3: Rapid charging for mobile phone
4: IC chip inside prevents overcharging and short circuit.
Voltmeter:
The meter has easy to read red LED
segments and connect to your 12 volt system. The meter body is made out of
heavy nylon. The meter draws nominally 10 ma. and the range is 0-30 VDC.
segments and connect to your 12 volt system. The meter body is made out of
heavy nylon. The meter draws nominally 10 ma. and the range is 0-30 VDC.
The
charger and voltmeter fits in a 1-1/8″ holes in panels up to 1-1/2 inch thick
with just the backing nut and in panels of unlimited thickness by placing the
rectangular compression plate over the front of the two and securing it with
two screws.
charger and voltmeter fits in a 1-1/8″ holes in panels up to 1-1/2 inch thick
with just the backing nut and in panels of unlimited thickness by placing the
rectangular compression plate over the front of the two and securing it with
two screws.
Jumper cable:
This is an 8 inch cable 16 gauge wire. Connects the charger and voltmeter together and allows for one connection to the assembly.
