Description
Tonal Beep Signal Alarm Buzzer + LED 12V Socket Panel #cal1C
Attention getting warning indicator alarm with blue flashing sight and sound. When activated, one second on and off beep beep action. Put this alarm in parallel with any 12 volt warning light to be notified when there is a problem.
Used for custom dashboard or operating panels. With operate on AC or DC 12 volts. #AL1C
For bilge alarms, Engine over heating, sump pump activation and low oil pressure.
Use with Boats, RV, Motorcycle, trucks, cars ATVs, snowmobiles, marine
Notifier sonalert type
Matches our standard line of 12 volt accessory or lighter sockets, USB charger sockets, switches and voltmeter. Used for custom dashboard or operating panels. With operate on DC 12 volts. #CAL1C
This is a listing for one panel dashboard mounted socket alarm and warning indicator. When 12 volts is applied the piercing tonal alarm and bright dual Red LED flash on and off in a one second interval cycle. The connections are two male 0.250 nylon insulated disconnect spade terminals on a wire 16 gauge pigtail. The leads are non-polarized and will work with 12 volts AC or DC.
-Working Voltage: DC/AC 12 Volts +/- 20%
-Non-polarized connections.
-Anti-shock capability.
-Mounting Hole: 1-1/8″ Panels of up to 1-1/2″ thick with backing nut.
-Continuous Working Life ≥30000h
-Sound volume: 80db
-Sound type: intermittent one second on/off
-LED Brightness:≥500cd
-Minimum Working Current:≤20mA
-Connections male 0.250 fully insulated spade terminals. Alarm options:
-Buzzer Type: Piezoelectric
-Frequency 3900: ±500Hz
-Color Red
