Description
Triple Heavy Duty 20A 12 Volt High Power Voltmeter Socket Plug Outlet Panel RV Fuse
Triple Heavy duty lighter sockets for hot pop out lighter plug use or for high power accessories. Comes with voltmeter, and waterproof fuse holder and fuse.
Splash proof front. #CVMB/CTD/CTD/CTD/fplt/4sq/fs15
Shipped from the USA
Good for defrosters, car heaters, seat warmer, heated gloves or jacket, etc.
These sockets can be used for both lighting cigarette or for accessories such as GPS, 12 volt chargers or iPods. Works with all lighter plugs and all 12 volt style accessory plugs.
This listing is for three heavy duty lighter sockets which have a nylon UV resistant body and a nickel plated cores and a voltmeter. Each of the sockets have a vinyl opening cap inserts into the core and snaps over the socket rim to produce a waterproof seal. The socket works with all pop out style lighter plugs or with standard accessory plugs. Internal prongs hold the plug for better vibration resistance. The terminals are male 0.250 or 6mm style crimp terminals. The sockets mount into a 1-1/8″ holes. They are rated a 20 amps at 12 volts. Socket length from the front flange to the end of the terminals is 2.0″.
DC Voltmeter
Display: segment LED digital tube, lamp display is blue, red available upon request.
Monitors the state of your battery between full charged and discharged
Can indicate a poor or bad charging system. Tells whether your battery is holding a charge or not
The meter has easy to read LED segments and connect to your 12 volt system.
The meter draws nominally 10 ma. and the range is 0-35 vdc.
Two ways to mount this sockets. Can be mounted against a panel or dashboards that is up to 1-1/4″ thick by using the socket nuts supplied. The nut tightens on the socket body to secure the socket to the panel. Or they can be mounted to even thicker panels by using the triple compression plate with four screws. The plate goes over the front of the socket flange and the four screw press the socket up against the panel from the front.
