Description
Waterproof Two 2 Pin Wire Terminal Solar Panel Connector 12 Volt Socket Voltmeter #CCn1+pbcn/CVMB/TPLT/4SQ
Highest quality waterproof two wire/pin polarized connector and voltmeter combination that can be mounted in a panel of any thickness. Rubber seals on all connections and mount. Protected front and back. Interconnecting wires allow you to read the voltage on the connector. #CCn1+pbcn/CVMB/TPLT/4SQ
Used for marine applications, solar panel connections and weather exposed connections.
Polarization allows for a safe positive and negative connection that can’t be crossed. Pin are marked with a 1 and 2 and Plus (+) and Minus (-). Pin 1 equals +. Pin 2 equals -.
This listing is for one two part waterproof panel connector, a voltmeter, mounting panel and screws and interconnecting wires. For 12 / 24 volts.
Connector:
The female connector portion can be mounted in a panel of any thickness. A tethered cap encloses the connector when not in use. The male portion attaches to the application cable. A packing nut on the back of male portion seals off the wire cable. The two connector parts attach together with screw coupling with rubber seals. The female panel connector body when mounted in the panel is waterproof with the rubber sealing washer. Male 0.250 spade terminals allow you to make the connections to the panel connector. Solder connections on the male connector. Rated for 15 amps at 12 volts. Mounts in hole of 1-1/8″. Can mount in a panel 1-1/4″ thick with just the backing nut. The compression rectangular mounting plate allows the connector to be mounted in a panel or dashboard of any thickness.
Voltmeter:
The meter has easy to read blue (red available upon request) LED segments and connect to your 12 volt system. The socket body is made out of heavy nylon. The meter draws nominally 10 ma. and the range is to 35 vdc.
