Description
Motorcycle Handlebar Mount USB Charger, Lighter Socket, Plug w/Skirt & Boots 12V
Heavy duty socket with lighter plug with skirt, and dual charger with snap over watertight front caps, dual handlebar mount and 60′ fused harness with jumper wire and terminal contact cover boots. #CUKD+/CTD+/SPLG/PBA/TMNT/YCH/AHRN60/2SBP
Ships
from the USA.
This
listing is for one dual mount, USB dual charger with boot, a high amperage power socket with boot, lighter plug and skirt and connecting terminals.
Attaches to
your 12 volt source and produces 5 volt, allows you to charge USB and 12 volt accessories. #CUKD+/CTD+/SPLG/PBA/TMNT/2flgcn
The Mount:
The mount can attach to a 3/4. 7/8 and 1″ rail or handlebars. The mount is black UV resistant nylon. The mount attaches to the handlebars or rail with a rail clamp and four screws.
The Charger:
The charger is rated for 2.1 amps at 5 Volts and can accept two USB devices. This charger uses built in integrated semiconductor technology to produce
a constant 5 Volts DC.
No LED to draw down your battery and is fully repairable, so if you get water in it you don’t have to replace the whole unit.
The cap on this charger is new and improved and is rubber not vinyl and snaps over the whole charger to produce a waterproof.
The terminal contact boot, included protects the back of the charger from weather.
The Socket:
Rated for 20 amps at 12 volt. Works with all 12 volt style plugs. Can be used for high power 12 volt appliances, chargers or for lighting cigarettes. Prong design holds plugs better than other lighter sockets. High current plugs at our other listings. Plug and socket combination are vibration resistant so the plug will not fall out.Tight fitting front cap and a terminal boot to protect the contacts.
Lighter Plug:
The pop out lighter plug come with a vinyl plug boot or skirt. This makes the plug socket combination more waterproof. When using a 12 volt plug and socket combination outdoors, there is a gap between the socket and the plug that is susceptible to water entry. When the plug is inserted into the power outlet / socket, the boot presses up against the socket surface and forms a seal. No more blown fuses or intermittent operation.
